Description
The Innokin Endura T20 S kit is a starter kit from Innokin. Great for people looking to switch or those looking for a great mouth to lung kit. The kit comes with 2 x 0.8 ohm coils but also there is a 1.5 ohm coil for a slightly cooler less intense vape if you find the 0.8 a little too spitty/ angry or are looking to improve battery life at the exchange for a slightly less intense vape. Now available in the rare rainbow colour. This is good for those who want a little more than the t18 kit from Innokin thanks to the bigger built in battery and the low resistance coil. Innokin T20s Vape Kit Specifications Battery Capacity: 1500mAH
Maximum Output Wattage 18W
Maximum Output Current 6A
Maximum Output Voltage: 3.85V
Clearomizer Resistance: 0.6 Ohm (min.)
Charging: Micro USB DC 5V/0.5A
Dimensions: 132mm x 22mm Endura T20s Kit Contents: 1x Endura T20S
1x Prism T20S Tank (0.8ohm)
1x Spare Prism S Coil (0.8ohm)
1x Spare Drip Tip
1x Quick Start Guide
1x Micro USB Charging Cable
1x User Packet How to use your T20s Tank Notes on changing coils The Innokin T20S Tank has a nice and easy coil change method, making sure your tank is empty first. Unscrew tank from device
Unscrew bottom airflow ring
Pull the coil out from the base of the tank
Prime up the new coil (see notes on priming coils)
Check the wattage rating on the coil
Push the new coil in, making sure that the flat side of the coil line up with the tabs on the bottom of the tank. Screw the airflow ring back onto the base of the tank (if your coil is not fully in there will be a gap between the airflow ring and the tank)
Screw the tank back onto the device
Fill tank with e-liquid (see notes on filling your tank)
Set the device to the wattage on the coil
Enjoy Notes on Filling the T20s Tank The Innokin T20s tank is easy to fill Unscrew the black top part of the tank
Fill with e-liquid down the side of the glass, try not to get e-liquid in the centre of the coil
Screw the top part back on Notes on Priming T20s Prism Coils Always prime your coils well when using for the first time
Add 5 or so drops to the centre of the coil saturating the cotton
Reassemble the tank making sure the coil is secured in place
Add your chosen liquid to the tank
Take 5 or so long drags on your device without power
To be absolutely sure leave rested upright for a minute
